Hello,

this is a stream from my new Twinhan DVB-S Card.

With MPlayer I have no Audio. But with any other Player.

This is one of the reasons, that i can't get Audio with
"mplayer dvb://ZDF".

By the Way, MPlayer reported:
Not able to lock to the signal on the given frequency

But then I documented out "return -1;" in check_status in
libmpdemux/dvb_tune.c and I can watch TV with "mplayer dvb://ZDF"
but without Sound.

I seems, that the FE_HAS_LOCK Flag is the Problem,
but not with szap:

reading channels from file '/home/daniel/.szap/channels.conf'
zapping to 383 'ZDF':
sat 0, frequency = 11953 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 0x0078
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 0028 | snr 1300 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 0028 | snr 1300 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

This is Working:
dvbstream -o -ps 110 120 | mplayer -
(but before I need to use szap to switch the tuner to ZDF)

This are the DVB- Modules I am using:
DVB-20050311.tar.gz:
videodev                4992  0
dvb_cn878              12804  3
dvb_core               88172  4 dvb_cn878
(I used also the old standard- modules, but the same)


Linux hellmaster 2.6.11.5 #4 SMP Sat Mar 26 14:39:39 CET 2005 i686 GNU/Linux

MPlayer dev-CVS-050328-19:40-3.3.5 (C) 2000-2005 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1

----------------------------------------------------------------------------------------
> dvbstream 8192 -o | mplayer -
dvbstream v0.5 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Setting filter for PID 8192
Output to stdout
Streaming 1 stream
MPlayer dev-CVS-050328-19:40-3.3.5 (C) 2000-2005 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Kompiliert f\uffffr x86 CPU mit folgenden Erweiterungen: MMX MMX2 SSE SSE2



Spiele -
Lese von Standardeingabe (stdin)...
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
Cannot seek backward in linear streams!
Seek failed
TS-Dateiformat erkannt!
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
Cannot seek backward in linear streams!
Seek failed
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=660)...NO AUDIO!  NO SUBS (yet)!  PROGRAM N. 0
Opened TS demuxer, audio: ffffffff(pid -1), video: 10000002(pid 660)...POS=0
Cannot seek backward in linear streams!
Seek failed
VIDEO:  MPEG2  720x576  (aspect 2)  25.000 fps  15000.0 kbps (1875.0 kbyte/s)
vo: X11 running at 1280x1024 with depth 16 and 16 bpp (":0.0" => local display)
xscreensaver_disable: xscreensaver wid=8389540.
==========================================================================
\uffffffne Videodecoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: VO wird versucht, auf 720 x 576 (Bevorzugter Farbraum: Mpeg PES) zu setzen.
Konnte keinen passenden Farbraum finden - neuer Versuch mit '-vf scale'..
\uffffffne Videofilter: [scale]
Der ausgew\uffffhlte Videoausgabetreiber ist nicht kompatibel mit diesem Codec.
Initialisierung des Videodecoders fehlgeschlagen :(
\uffffffne Videodecoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
Audio: kein Ton!
Starte Wiedergabe...
VDec: VO wird versucht, auf 720 x 576 (Bevorzugter Farbraum: Planar YV12) zu setzen.
VDec: using Planar YV12 as output csp (no 0)
Film-Aspekt ist 1.33:1 - Vorskalierung zur Korrektur der Seitenverh\uffffltnisse.
VO: [xv] 720x576 => 768x576 Planar YV12
V:22266.9  29/ 29 21%  0%  0.0% 0 0
Beenden... (Ende)

--------------------------------------------------------------------------------------------




If you need more Information, please ask.

Daniel Betz [danbetz@gmx.de]